Squid Cast 2.0 (2" Pours)

$41.00
Size

We recommend using our NEW Reusable Forms for your epoxy Projects. 

SQUID-CAST EPOXY RESIN

SQUID-CAST is a two component high build, medium viscosity, REAL CRYSTAL CLEAR CASTING RESIN that is used to obtain a high durable finish for any of your wood working project as well as a high sheen gloss finish. Can be used to CAST up to 2 inches and pairs well with colorants & metallic pigments but also great for crystal clear transparent finishes. This resin is the EASIEST WOODWORKING RESIN on the current market for CASTING RESINS!

APPLICATION

Start by mixing a 2:1 ratio of 2 part A resin to 1 part B hardener curing agent into a plastic measuring container, then add colorant or metallic mixing powder to the mix. Mix the contents for a MINIMUM of 3 to 4 minutes thoroughly and slowly and when ready pour into your project or casting project slowly to help reduce creating any air bubbles. The working time is 15-24 hours at 68-degree Fahrenheit, giving you enough time to properly pour the resin, mix colorants and create patterns accordingly. This resin can be poured at a maximum of 2-inch thickness and is ideally used for CRYSTAL CLEAR FINISHES or with any of our metallic pigments. In ideal lab temperatures this resin cures between 96-120 hours at 2-inch pours. Thinner pours and thin films can take much longer.

Customer Reviews

Based on 8 reviews
88%
(7)
13%
(1)
0%
(0)
0%
(0)
0%
(0)
D
David (Little Current, CA)
Good stuff

I have gone through about 40 litres of this stuff so far and not one issue. Superior product.

S
Sean Winter (Brampton, CA)
Great Product

The pour came out great and looks amazing. I did have a small issue with the epoxy starting to congeal but that was because I mistakenly left it in an area that was too cold. Even though I was specifically warned about that. Still managed to have enough epoxy for the project. I have already ordered more for the next project!!

B
Brenda G (Thunder Bay, CA)
Perfect

Jeff Mack provides quick efficient service at reasonable prices. The product does what is says it will.

V
Vadim Bedarev (Toronto, CA)
For smaller project would use faster setting epoxy even for 2"

Used this epoxy first, but as instructions state it cures a long time (few days). Only had to fill 1/2 inch wide crack, but it was over 2" deep. Also, did not use red tape, so first pour(s) leaked out (tried aluminum, duck, green masking tapes). So, with this epoxy RED masking tape is a must or a use of a well prepared form. I then tried Squid Clear Fast. I mixed it for longer and let it to start thickening (15-20min). I poured only 1/2 first, used red tape on the bottom and also clamped for some extra pressure on tape. It worked really well. Next pour finished the job. Still working on sanding and coating, but that table is going to look awesome! Thank you!

S
Sean Cammaert (Hamilton, CA)
Squid Poxy

Mixed well and poured evenly. The set up time was only 2 days and was crystal clear. Cant wait for my next pour. Cool name and branding!!!

You recently viewed

Clear recently viewed

Customer Reviews

Based on 8 reviews
88%
(7)
13%
(1)
0%
(0)
0%
(0)
0%
(0)
D
David (Little Current, CA)
Good stuff

I have gone through about 40 litres of this stuff so far and not one issue. Superior product.

S
Sean Winter (Brampton, CA)
Great Product

The pour came out great and looks amazing. I did have a small issue with the epoxy starting to congeal but that was because I mistakenly left it in an area that was too cold. Even though I was specifically warned about that. Still managed to have enough epoxy for the project. I have already ordered more for the next project!!

B
Brenda G (Thunder Bay, CA)
Perfect

Jeff Mack provides quick efficient service at reasonable prices. The product does what is says it will.

V
Vadim Bedarev (Toronto, CA)
For smaller project would use faster setting epoxy even for 2"

Used this epoxy first, but as instructions state it cures a long time (few days). Only had to fill 1/2 inch wide crack, but it was over 2" deep. Also, did not use red tape, so first pour(s) leaked out (tried aluminum, duck, green masking tapes). So, with this epoxy RED masking tape is a must or a use of a well prepared form. I then tried Squid Clear Fast. I mixed it for longer and let it to start thickening (15-20min). I poured only 1/2 first, used red tape on the bottom and also clamped for some extra pressure on tape. It worked really well. Next pour finished the job. Still working on sanding and coating, but that table is going to look awesome! Thank you!

S
Sean Cammaert (Hamilton, CA)
Squid Poxy

Mixed well and poured evenly. The set up time was only 2 days and was crystal clear. Cant wait for my next pour. Cool name and branding!!!