All you need to know about
Pigments Pt 1

What we Exclusively Use:

Beaver Dust Pigments

We absolutely love the variety and selection to choose from. Their vibrant colours bring unique colour tones to our resin projects.

How to Achieve Different Pigment Effects:

Suggested : 1/8 teaspoon per 1 litre will give you a medium transparency effect.

When it comes to mixing pigments together there are NO Rules! Just like mixing paint to achieve different colours, you can experiment with any combination to create whatever effect you are looking for.  


Transparent Effect: 

To achieve this look of only a slight colour tint and still being able to see through your pour,
you will want to make sure you only add in a small ratio of pigment to resin.
Remember you can always add pigment but you can not remove it from your epoxy! 

Deciding on transparency level is subjective and up to personal preference.
A safe way to start out is with 1/16 teaspoon of pigment to see how it effects the amount you are pouring and continue to add from there.

Opaque Effect

This application you will not be able to see through your pour. Remember when you are mixing in a container that the resin is more concentrated. Make sure you have added enough to reach your desired look before pouring it out into your project.
If you begin to pour and you are not satisfied with what the colour looks like, immediately stop. Mix more pigment into your container throughly before you continue to pour out the rest of your resin. 

Testing your Opacities before pouring

To get an idea of what the transparency level is, take a popsicle stick (or your stir device) and stick it into the container the depth of what you are pouring (IE if you are pouring 1.5" thick, put your popsicle stick 1.5" deep into your container). If you can see it, that means your pour will still be translucent and you will be able to see through the pour. Add more pigment until you can not see the end of the stir stick if you are looking for an opaque look.


 Make sure you throughly mix your resin before adding pigment. It's easiest to evaluate the true colour of the pigment when mixed in a clear container.


Navy Blue Beaver Dust Pigment

Mixing Pigment with your Resin

To measure the amount of pigment, we simply use measuring spoons (Purchase Here).
When mixing the pigment with your resin, we use a mixer drill attachment (Purchase Here). You can also mix by hand using a wooden paint or popcycle sticks for smaller quantities.

A little bit of pigment goes a long way. We suggest to add a small amount to your pour and add a little bit at a time while thoroughly mixing in-between until you achieve the desired look. Make sure you are mixing throughly scraping the sides, bottom of your container and stir stick. You don't want the pigment to settle on the sides or bottom of your container leaving large amount of flecks not stirred into the resin.


Read Part 2 of "All you Need to Know about Pigment" HERE