Live Edge 18" DIY River Kits for Charcuterie Board and Small Projects
These live edge slabs have been kiln dried, flattened, debarked, cut square on one edge and sanded to 80 grit. These slabs are very DIY friendly and can be used as a set to create a river art piece, charcuterie boards or used individually.
We highly recommend using one of our Reusable Forms for these river sets. Check them out here.
Charcuterie Stock
How much Epoxy will you need for a Charcuterie (3/4"-1" thick) River?
2" river @ 24" long needs .786 L of Ecopoxy FlowCast.
3" river @ 24" long needs 1.18 L of Ecopoxy FlowCast.
4" river @ 24" long needs 1.57 L of Ecopoxy FlowCast.
5" river @ 24" long needs 2 L of Ecopoxy FlowCast.
2" river @ 36" long needs 1.18 L of Ecopoxy FlowCast.
3" river @ 36" long needs 1.77 L of Ecopoxy FlowCast.
4" river @ 36" long needs 2.36 L of Ecopoxy FlowCast.
5" river @ 36" long needs 2.95 L of Ecopoxy FlowCast.
We recommend Walrus Oil- Cutting Board Oil or Rubio Monocoat Pure 2C Oil for to finish charcuterie boards.
When our charcuterie river sets are paired together, you should be able to make a river piece approximately 6"-16" wide depending on how much epoxy you use.
The pictures are not the exact slabs that you will receive but they do represent an example of what you can expect to receive.
We've personally gone through all the slabs to ensure that everything being shipped is up to our standards.
SIZE:
Width: 3"-7" wide
Thickness: 3/4"- 1" Thick
Sold in Pairs
Potential Uses:
River Art Piece
River Charcuterie Boards
River Serving Boards
River Coasters
River Cribbage Board
DIY Projects
