Live Edge Rustic DIY Walnut Slabs
These live edge Walnut slabs have been kiln dried, flattened, debarked and sanded to 80 grit. These slabs do have either a Void, knot or a split that will require some extra attention and will likely need an epoxy fill. These boards are great if you are new to epoxy and want to try epoxy out for the first time.
All slabs are planed to 80% to maintain maximum thickness. Some rough area's may require a bit more sanding. One side of the slab is always planed 100%
We recommend using Ecopoxy FlowCast to fill these knots, cracks and voids.
We recommend Walrus Oil- Cutting Board Oil to finish these boards.
The pictures are not the exact slabs that you will receive but they do represent an example of what you can expect to receive.
We've personally gone through all the slabs to ensure that everything being shipped is up to our standards.
SIZE:
Lengths Available: 24" and 36" long
Width: 4"-8" / 6"-12" / 12"-20"
Thickness: 5/8"-1"" thick
Quantities Available: 1, 3, 5 and 10
Potential Uses:
Epoxy Charcuterie Boards
Charcuterie Boards
Serving Boards
Wall Art
DIY Projects
