Epoxy/Resin Mold Accessories

$4.00 USD
Size

Our reusable HDPE Epoxy forms are a great investment for any shop or hobbyist looking to save time and these accessories can take these forms to the next level. 

Each Divider is cut to a 7 degree angle which will fit nicely in your form. 

Clamping Blocks (Set of 4)
Size:

  • 2.25" Long
  • 1.5" Wide
  • 3/4" Thick

Dividers
Sizes Available:

  • 48" by 3" by 3/4" Thick
  • 36" by 3" by 3/4" Thick
  • 24" by 3" by 3/4" Thick
  • 18" by 3" by 3/4" Thick
  • 12" by 3" by 3/4" Thick
  • 10" by 3" by 3/4" Thick
  • 4.5" by 3" by 3/4" Thick

If you have questions about our forms and accessories, please check out our FAQ's to get your answer!

Order some DIY River Sets for your next pour! 

We recommend using Akfix Seal Max to seal the dividers in your form.

If you have questions about our forms and accessories, please check out our FAQ's to get your answer!

Order some DIY River Sets for your next pour! 

We recommend using Akfix Seal Max to seal the dividers in your form.

Customer Reviews

Based on 44 reviews
98%
(43)
2%
(1)
0%
(0)
0%
(0)
0%
(0)
P
Peter Fillmore (Etobicoke, CA)
Excellent Product! HDPE Dividers

I purchased (2) 36" long 3/4" thick HDPE Dividers, as replacements for the thinner 1/2" dividers for my Epoxy Resin Mold from a different supplier (MRM). I cut these to 24" and used the excess to make clamping blocks. These thick dividers are very sturdy; and an upgrade from the thinner 1/2" originals which had started to warp. I had previously been using 2x4s covered in tuck tape to replace the warped dividers. This allowed me to maximize the space in my resin mold and get a full 6 boards in my pours, versus the 4 with the 2x4s covered with tuck tape.

M
MATTHEW BALLINGER (Calgary, CA)
Great mold

Only used a couple times but a couple light taps and resin board dropped out

R
Reginald Schick (Regina, CA)
Molds

Great product. Thank you.

N
Neil Abney (Dallas, US)
One piece mold

Love the mold, works great every time and I don’t have the hassle of putting a leak free box together

G
Gina Smith (Florence, US)
Great Product

Excellent Product !!!

You recently viewed

Clear recently viewed

Customer Reviews

Based on 44 reviews
98%
(43)
2%
(1)
0%
(0)
0%
(0)
0%
(0)
P
Peter Fillmore (Etobicoke, CA)
Excellent Product! HDPE Dividers

I purchased (2) 36" long 3/4" thick HDPE Dividers, as replacements for the thinner 1/2" dividers for my Epoxy Resin Mold from a different supplier (MRM). I cut these to 24" and used the excess to make clamping blocks. These thick dividers are very sturdy; and an upgrade from the thinner 1/2" originals which had started to warp. I had previously been using 2x4s covered in tuck tape to replace the warped dividers. This allowed me to maximize the space in my resin mold and get a full 6 boards in my pours, versus the 4 with the 2x4s covered with tuck tape.

M
MATTHEW BALLINGER (Calgary, CA)
Great mold

Only used a couple times but a couple light taps and resin board dropped out

R
Reginald Schick (Regina, CA)
Molds

Great product. Thank you.

N
Neil Abney (Dallas, US)
One piece mold

Love the mold, works great every time and I don’t have the hassle of putting a leak free box together

G
Gina Smith (Florence, US)
Great Product

Excellent Product !!!