Wine Bottle Inlay Router Template (Clear Acrylic)

Wine Bottle Inlay Router Template - Clear Acrylic Woodworking Template

Add a clean wine-themed inlay to your next woodworking project with this reusable clear acrylic Wine Bottle Inlay Template. Designed for routing recessed inlay pockets, this template is a great fit for charcuterie boards, serving trays, wine tasting boards, signs, live edge wood, wall art, and epoxy-filled woodworking projects.

The wine bottle profile has a tall, narrow layout that works well along the side of a serving board, beside a handle, near the edge of a charcuterie board, or as part of a larger wine-themed design. It is a practical template for makers building gifts for wine lovers, wineries, restaurants, tasting rooms, housewarmings, weddings, and custom entertaining pieces.

What You Can Make With This Template

• Wine bottle inlays for charcuterie boards and serving boards
• Epoxy-filled wine bottle details in live edge wood
• Wine tasting boards, cheese boards, trays, and display pieces
• Custom signs for wine rooms, bars, restaurants, and tasting areas
• Handmade gifts for wine lovers, weddings, housewarmings, and host gifts

Why Use a Clear Acrylic Wine Bottle Inlay Template?

• Designed for recessed inlays: This template is made for routing a pocket into the surface of your project, not for cutting out a full board shape.
• Clear for accurate placement: The transparent acrylic lets you see the wood grain, figure, knots, live edge, and layout marks underneath before routing.
• Great for wine-themed projects: The wine bottle shape pairs naturally with charcuterie boards, cheese boards, serving trays, wine room signs, and entertaining pieces.
• Reusable for repeat work: Made from 1/4" thick acrylic, this template can be used again and again when handled carefully and stored flat.
• Works well with epoxy: Route the wine bottle pocket, fill it with epoxy and pigment, let it cure, then sand it flush for a clean finished inlay.

Recommended Products to Use With This Template

• Template Tape - Use this to secure the acrylic template to your wood before routing.
• Pocketing Bit - Helpful for removing most of the material in the larger open areas of the wine bottle inlay.
• Small Detail Pocketing Bit - Useful for tighter curves, smaller openings, and finer areas around the bottle neck and profile details.
• EcoPoxy UVPoxy - A good epoxy option for filling routed inlays up to 1/4" deep.
• Beaver Dust Pigments - Add colour, shimmer, contrast, or a bold filled look to epoxy inlays.
• Dimensional Wood - Great for serving boards, signs, trays, panels, and repeatable inlay projects.
• Live Edge Wood - A natural fit for charcuterie boards, wine tasting boards, rustic serving boards, and epoxy inlay projects.
• Walrus Oil Cutting Board Oil - Recommended for food-contact boards after sanding and finishing.
• Grand Finishing Hardwax Oil - A strong choice for decorative and non-food-contact projects like signs, trays, wall art, and display pieces.

How to Use This Wine Bottle Inlay Template

1. Prepare your wood: Start with a flat, clean surface. This template works well on dimensional boards, live edge boards, charcuterie boards, serving trays, signs, and decorative panels.
2. Position the template: Place the clear acrylic Wine Bottle Inlay Template on your project and use the transparency to line it up with the grain, live edge, board edge, centreline, handle area, or layout marks.
3. Secure with template tape: Apply template tape to the back of the acrylic template and press it firmly onto the wood before routing.
4. Route the inlay pocket: Use the larger pocketing bit to remove most of the material in the wider areas. Use the small detail pocketing bit for tighter curves, smaller openings, the bottle neck, and finer details around the wine bottle profile.
5. Remove the template: Carefully lift the template from the wood after the pocket has been routed.
6. Fill the inlay if desired: For an epoxy-filled look, mix epoxy with your chosen pigment and fill the routed wine bottle pocket. Leave enough material to sand flush after curing.
7. Sand and finish: Once the epoxy has fully cured, sand the inlay flush with the wood surface. Use a food-safe oil for charcuterie boards and food-contact pieces, or a hardwax oil for decorative and non-food-contact projects.

Watch How We Use Acrylic Inlay Templates

This video shows the general process for using clear acrylic router templates to create clean, repeatable inlay pockets.

Template Details

• Design: Wine bottle profile
• Wine bottle profile size: Approximately 2.75" wide by 10.625" tall
• Template size: 11.75" tall by 7.875" wide
• Material: 1/4" thick clear acrylic
• Use: Routing recessed inlay pockets, tracing, and repeatable layout work
• Template SKU: 04-014

Helpful Router Template Guides

• Template Guides - Browse our main hub for router template tips, project ideas, and related guides.
• Router Template Guide - Learn how router templates work and how to get cleaner, more consistent results.
• What Router Bit Do I Need? - Choose the right router bit for pocketing, detail work, and template routing.
• Template Routing for Beginners - A beginner-friendly guide to getting started with acrylic templates and routers.

Frequently Asked Questions

Is this wine bottle template for cutting out a full board shape?

No. This template is designed for routing a recessed wine bottle-shaped inlay pocket into the surface of your project. It is not intended as a full board outline or cutout template.

Can I fill the wine bottle inlay with epoxy?

Yes. After routing the pocket, you can fill the wine bottle inlay with epoxy and pigment. Once the epoxy cures, sand it flush with the wood surface for a clean finished result.

Which router bit should I use with this template?

Use the larger pocketing bit to remove material efficiently in the wider areas. Use the small detail pocketing bit for tighter curves, smaller openings, the bottle neck, and finer details around the wine bottle profile.

How do I secure the acrylic template while routing?

We recommend using template tape. It holds the clear acrylic template firmly to the wood while routing and avoids the need for screws or clamps in most inlay layouts.

Can this template be reused?

Yes. The template is made from 1/4" thick acrylic and can be reused many times when handled carefully, cleaned after use, and stored flat between projects.

What projects work best with a wine bottle inlay?

This design works well for charcuterie boards, cheese boards, wine tasting boards, serving trays, wine room signs, bar signs, restaurant decor, live edge serving boards, wall art, and handmade gifts for wine lovers.

What finish should I use after sanding?

For food-contact boards and serving pieces, use a food-safe cutting board oil such as Walrus Oil Cutting Board Oil. For decorative or non-food-contact projects, Grand Finishing Hardwax Oil is a good option for a durable, natural-looking finish.

Create clean, repeatable wine bottle inlays with accurate placement, consistent routing, and a professional finished look. This clear acrylic Wine Bottle Inlay Template is a practical shop template for charcuterie boards, wine tasting boards, live edge pieces, signs, trays, wall art, and epoxy-filled woodworking projects.